Heat Pump Repair in Graham, NC

Graham is the Alamance County seat adjacent to Burlington with a mix of residential and commercial properties that rely on HVAC service through North Carolina's heating and cooling seasons.

Call (336) 383-1442 Call for Service

Prefer to write instead? Request a quote online →

Heat pumps provide both heating and cooling — when they fail, they take both functions offline. We connect homeowners across Graham and Alamance County with local contractors who diagnose and repair heat pump systems year-round.

Graham is the seat of Alamance County, sitting just east of Burlington along the historic rail corridor that shaped much of the county's early textile and manufacturing growth. Its downtown and surrounding neighborhoods include a meaningful share of early-to-mid-1900s housing built during that manufacturing era, with newer residential growth extending toward the I-40/I-85 corridor and neighboring Mebane. Like the rest of Alamance County, Graham deals with long stretches of sticky summer heat and winters where an ice storm is a bigger practical concern than a heavy snowfall. Graham's older homes, many originally built without central air, commonly have cooling systems added after the fact through ductwork retrofitted into existing wall and ceiling cavities — a setup that limits airflow more than duct systems designed into a home from the start, and one that shows up as uneven room-to-room cooling more often than in newer construction.

Heat Pump Problems We Fix

Common heat pump failures include reversing valve problems that prevent the system from switching between heating and cooling modes, refrigerant leaks, defrost board failures that cause ice buildup on the outdoor unit, compressor issues, and auxiliary heat problems. Heat pump diagnostics require specialized knowledge of the refrigerant cycle in both directions.

System runs constantly but never quite reaches the set temperature

This often points to a refrigerant or airflow issue rather than a thermostat problem — a technician can check charge levels and airflow before assuming the system itself is undersized.

Outdoor unit is covered in ice, even when it's not especially cold out

Some frost during a normal defrost cycle is expected, but heavy ongoing ice buildup usually means the defrost cycle isn't completing correctly or airflow is restricted.

Noticeably higher electric bills with no change in usage habits

A heat pump working harder than it should to hit the same comfort level is a common early sign of a developing mechanical issue, often before anything sounds or feels obviously wrong.

Heat Pump vs. Furnace in Piedmont Triad

In Piedmont Triad's climate, heat pumps are efficient down to certain outdoor temperatures, after which auxiliary or emergency heat takes over. If your heat pump is running but not keeping up in cold weather, the issue may be with the auxiliary heat source rather than the heat pump itself. The full system gets checked to confirm.

Rooms that have always been colder than the rest of the house. That is normally duct sizing, air balance, or insulation, and a repaired heat pump will heat those rooms the same way it did before.
A system that was undersized for the house at installation. A repair restores the capacity the equipment was built for, not more.
Winter electricity costs caused by auxiliary heat operating as intended in cold weather. Lowering that is a thermostat-settings and balance-point discussion, not a repair.
Duct leakage in an unconditioned attic or crawlspace, which loses conditioned air no matter how well the equipment itself performs.
Summer humidity complaints traced to an oversized system that short-cycles. Component repair does not change how the system was sized.

Have Questions?

Serving the Piedmont Triad — Greensboro, High Point, Winston-Salem, and surrounding areas.

Call (336) 383-1442

This content is reviewed by the Piedmont Triad HVAC editorial team and informed by licensed-contractor sourcing, manufacturer documentation, and established industry standards for HVAC repair. Read our editorial standards.

14.3 SEER2

New federal minimum efficiency rating for heat pump systems in most regions as of 2026

Source: ServiceNation, SEER2 HVAC Efficiency Standards

13.4 SEER2

is roughly what a 14-SEER system built under the old rating scale tests at today — the stricter SEER2 test doesn't mean older equipment got worse, it means the yardstick changed

Source: South Mini Splits, SEER vs SEER2 Guide, 2026

Frequently Asked Questions

My heat pump is running but blowing cool air when it should be heating. What's wrong?

This is a common heat pump complaint, and it has a few possible causes: a stuck reversing valve that won't switch the system into heating mode, low refrigerant, or the system relying on auxiliary heat that isn't kicking in. It doesn't automatically mean the compressor has failed — we test the reversing valve and refrigerant circuit before assuming the worst.

What does heat pump repair usually cost?

It varies by component. A defrost board or capacitor repair is a modest job; a reversing valve or compressor issue is more involved because of the refrigerant work required. We diagnose the actual fault first and give you a written estimate before any repair, so the cost reflects the real problem rather than a guess.

Should I repair my heat pump or replace the whole system?

If the unit is relatively young and the fault is a single part — a capacitor, contactor, or defrost board — repair is almost always the right call. A failed compressor, especially on a system already past 10-12 years old, is where replacement starts making more sense, since compressor work is expensive relative to the value left in an aging unit. We lay out both paths honestly.

How often does a heat pump need maintenance, and why does it matter more than for a furnace?

We recommend twice-a-year service for heat pumps — once before cooling season and once before heating season — since the same unit runs year-round in both modes. In Piedmont Triad, winter freezes put real stress on the outdoor unit's defrost cycle, and neglected units are the ones we most often see with ice buildup or reversing valve failures.

What is the most common problem with heat pumps?

Across service calls the most frequent failures are electrical and control-side rather than catastrophic: capacitors, contactors, defrost boards, and defrost sensors. Reversing valve and compressor failures get the most attention because they are expensive, but they are far less common than the smaller parts that stop a unit from switching modes or completing a defrost cycle. That distinction matters for what you should expect — a heat pump that has stopped heating is more likely to need a modest part than a new system.

At what outdoor temperature does a heat pump switch to auxiliary or emergency heat?

There is no single temperature. It depends on the balance point for your home, which is the outdoor temperature at which the heat pump's output stops matching the building's heat loss. On many systems that falls somewhere in the 30s Fahrenheit, but it is a function of the equipment, the insulation, and how the thermostat is programmed rather than a fixed number. Auxiliary heat engaging during genuinely cold weather is normal. Auxiliary heat running in mild weather is not, and that usually points to a control, sensor, or refrigerant charge problem worth diagnosing.

Not Sure If You Have a hvac repair Problem?

Many homeowners aren't sure what they're seeing. We put together a straightforward guide to the warning signs that are worth taking seriously.

See Our Maintenance Guide

Ready to Fix Your HVAC?

Call us for fast, honest HVAC repair across the Piedmont Triad.

Call (336) 383-1442

Request Information

Prefer to write instead of call? Send a quick note and we'll follow up.